Acon Mission® Cholesterol meter starter set with 5 test strips
Everything you need to measure complete cholesterol with Europe's #1 cholesterol meter. Recommended by leading cardiovascular physicians, laboratories, healthcare professionals and consumers.
The results are comparable to the laboratory and allow continuous monitoring of all cholesterol parameters: Total cholesterol CHOL, HDL-cholesterol, LDL-cholesterol, triglycerides and the cholesterol ratio.< /p>
Test results in 1 minute with just a few drops of blood and 1 single test strip.
The Mission 3-in-1 cholesterol meter is praised for its accuracy. Used daily by thousands of doctors, clinics, laboratories, healthcare professionals and consumers.
- Highly accurate blood cholesterol measurement
- Determines all cholesterol values: total cholesterol, HDL, triglycerides, LDL and cholesterol ratio with a single test strip. Calculates cardiovascular risk
- Only 35 μL blood from the fingertip
- Easy to use, suitable for both professional and home use
- All values are displayed after using the 3 in 1 strip and stored in the meter's memory
- Can be set to mg/dl or mmol/l
CHOL: 100-500 mg/dl (2.59-12.93 mmol/l) (≤ 5.0%)
HDL: 30-100 mg/dl (0.78-2.59 mmol/l) (< 5.0%)
TRIG: 100-650 mg/dl (1, 13-7.34 mmol/l) (< 5.0%)
The highly accurate Mission 3 in 1 Cholesterol offers advanced performance:
- Suitable blood from fingertip or venous whole blood, serum or plasma
- Reliable detection using reflection photometry wavelengths 635nm
- Automatic calibration with code chip
- Memory for 200 full cholesterol results with time and date
- 4 AAA or AC adapter (Mini USB, 5V DC, 50 mA)
- Auto shut-off 5 minutes
- Long battery life ≥ 1,000 tests
- Wide operating temp. range 15-40 ° C (59-104 ° F); enables testing almost anywhere
- Relative humidity when operating 10 – 90%
- Meter dimensions (L x W x H) 137mm × 79mm × 26mm (5.4 “x 3.1” x 1.0 “)
- Large display 50mm x 50mm
- Lightweight 145 grams, excluding batteries
- PC interface for data transfer to PC Mini USB port
- CE0123 certified
Content*:
- Acon Mission Cholesterol Meter
- 5x Mission 3-in-1 cholesterol test strips incl. code chip
- 5x safety lancing devices
- 5x blood transfer capillaries
- 4 Batteries
- 1 Pouch
- 2 Control Strips
- Manual
Preparation
Meter Setup: You must configure the meter before first use. This only needs to be done once. Watch the videos below for the first setup and testing.
*Control fluid (for laboratories only), lancing device and sterile lancets are not part of this type of starter pack.
Quick setup pdf:
Dutch
Deutsch
Français
Documentation:
Mission documents
PCSoftware:
PC interface software can be downloaded here
To view this video, you first have to accept the cookies.
To view this video, you first have to accept the cookies.